AOR AR5000 Manual de instrucciones descargar pdf (Pagina 5)

Test frequency (wanted) Unwanted frequencies Product

25.800 MHz 25.925 & 26.050 MHz -8dBm

129.800 MHz 129.925 & 130.050 MHz -14dBm

320.800 MHz 320.925 & 321.050 MHz -12dBm

470.800 MHz 470.925 & 471.050 -10dBm

850.800 MHz 850.925 & 851.050 -10dBm

Cross modulation:

Wanted frequency 129.800 MHz, 60% AM with 15 kHz bandwidth -93dBm S/N 21.5dB

Interfering signal 129.900 MHz, 30% mod

-23dBm S/N 18dB 60dB

-27dBm S/N 20dB 56dB

Wanted frequency 129.800 MHz, 60% AM with 15 kHz bandwidth -89dBm

Interfering signal 129.925 MHz, 30% mod -23dBm S/N 20dB 60dB

There are two resets for the AR5000:-

1) CPU RESET. If switching the set off/on does not help, the next action should be to reset

the receiver using the hidden reset switch provided.

The reset switch is located behind the torque lever to the right of the main tuning dial.

i. Move the lever to the downwards position, a black cloth material covers the slot. The reset

switch is located at the top of the slot about 10mm behind the front panel.

ii. Using a match stick or similar tool, press and release the reset switch (with the unit

switched on, and powered in a normal manner).

iii. The back light will extinguish then all LCD characters will be displayed, the set will then

power up and resume normal operation (if it has not automatically switched on again press the

"Power" button).

This will re-boot the CPU without erasing the search/memory contents or going back to the

default settings. The last entered frequency in VFO may be lost.

2) CPU SOFT RESET. If the reset switch does not help, it is possible to SOFT RESET the

AR5000 CPU. This will clear all bank link information and reset the VFO to default

parameters including frequency display of 128.900Mhz.

i. Switch the receiver off (unplug the power cord if necessary to power down the receiver).

1 2 3 4 5 6 7 8 9 10 ... 23 24

Sin comentarios

AOR AR5000 Manual de instrucciones Pagina 5